Grandstream IP adaptor HandyTone 286 Configuration Setup Guide

Device Configuration Guides

Grandstream HandyTone 286

This is an ATA adaptor with a single ethernet interface and one POTS line enabling you to use a traditional phone as a SIP enabled IP device. This means that you will need an open ethernet port on your local network. It is fairly simple to setup and almost identical to the BudgeTone 100 configuration. The default configuration will get an IP address via DHCP.

STEP 1
You must first determine the IP address of the device. There are two ways of doing this depending on the firmware version installed on the device. If option 1 does not work, try option 2.

Plug a POTS phone into the RJ11 connector, lift the handset and press the red button. Dial '02'. You will be told the IP address of your device (e.g. 192.168.0.100).
Plug a POTS phone into the RJ11 connector, lift the handset and press the * (asterisk) button 4-5 times until the menu says “IP ADDRESS”. The current IP address will then be repeated back to you.

STEP 2
Go to any browser equipped computer on your network and enter the address:

http://<IP ADDRESS>/

(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1.

STEP 3
You will be prompted to enter a password, the default is "admin", then click the "Login" button.

STEP 4 You need to modify only a few parameters from the factory default. They are listed below and can be found on the “ADVANCED SETTINGS 1” and “ADVANCED SETTINGS 2” tabs at the top of the page.

SIP Server:	sip.inphonex.com
SIP User ID:	Enter the phone number you chose when you signed up for InPhonex service.
Authenticate ID:	Enter the phone number you chose when you signed up for InPhonex service.
Authenticate Password:	Enter the password that you chose when you signed up for InPhonex service.
Name:	Enter your full name. This will show up as part of your caller id.


SIP Registration: Yes


NAT Traversal: No


Set "Enable Call Feature" to "yes"


Send DTMF: via RTP (RFC2833)

STEP 5
Click on the "Update" button at the bottom of the form.

STEP 6
You will be brought to a confirmation screen on which you will click on the only option available: "Click to view your changes".

STEP 7
Click on the "Reboot" button at the bottom of the form.

STEP 8
Make calls!

Our Home Phone Service includes Internet phones with free Internet calling and unlimited US and Canada plans. We offer prepaid phone service and International DID numbers using our voice over IP system and an analog telephone adaptor (ATA). The solutions are designed for home phone service, business phone service, call shops, telemarketing firms and cyber cafes. InPhonex is proud to support Internet telephony equipment (IP Phones) including Sipura 2000, Sipura 3000, Cisco 186, Linksys PAP2 and other SIP phone adaptors. We also support Asterisk PBX, Trixbox and offer turn-key VoIP Reseller business opportunities to let entrepreneurs and businesses resell voice over Internet (VoIP) under their brand name.